Modified Minors
Morris brakes
Posted by dodyudynosur1213
|
dodyudynosur1213
Abbas Abboobaker
|
Topic Creator (OP)
Oct 19, 2020 10:01 PM
Joined 10 years ago
139 Posts
|
Hi guys need a bit of help with brakes .changed brake fluid and serviced the brake cylinders .when I bleed it starts to build up but as I pump and release the brake fluid pedal to the floor .I than have to start all over again .When I do have brakes the pdesl when depressed does hold it does not go down .Am not in a position to determine if the master is faulty will appreciate any help
about 1 month and 6 days later...
|
TANSTAAFL
Pat Atkinson
|
Nov 25, 2020 04:10 PM
Joined 14 years ago
74 Posts
|
Did you change the fluid because it was due for a service or was there an issue with the brakes before you did the fluid change. If it was a regular service; then you've just got air in the lines and need to start again with the bleed. - furthest from the master first (back offside?), then work through making sure the reservoir stays topped up.
If you had a problem before starting, then the bleed has probably accelerated a failed part.??
If you had a problem before starting, then the bleed has probably accelerated a failed part.??
Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or click Contact Support at the bottom of the page.









