Morris Minor Chat

Welcome! Sign In Register
Please Sign In or Register to Search

Age query

Posted by timcloake 
AutoShrine Sponsor
AutoShrine Sponsor
AutoShrine Sponsor

tim cloake
rolleston, New Zealand   nzl
Hello everyone
I have just recently had the all go on a restoration project with my granddad on a Morris Minor van.
I'm 15 and this will be my first car ever to own and its pretty exciting that its going to be a Morris, the car has been down the shed just sitting for a good 15 years now and from light inspection the verdict is, brakes need replacing the exhaust is fine the engine seems to be in reasonable nick and my granddad thinks it should start first pop ..... maybe.Anyway the wheels are fine small areas of rust around the roof and below all the doors. my granddad believes that the paint job is possibly original so i haven't really decided if i want to change it yet.not to sure about the shocks or anything because i dont really know how to tell if there's anything actually wrong with them, the whole interior is in good condition too so all over i'm really happy with the state of it and glad that it isn't going to take a too bigger chunk from my wallet to have it a full quality condition. Me nor granddad are to sure of its age so i got the serial number of the car and with a bit of luck i'm hoping someone on this forum could tell me or at least point me in the right direction hopefully smiling smiley
the serial number is : 247542

cheers
timcloake

. You can hide this ad & support this site by upgrading to a Gold Membership ~ click here for more info.
David53 Avatar
David Hines
Sydney, Australia   aus
Hi

This car will have been made between Feb 54 and Jun 54.

Cheers
Jonny W
Auckland, New Zealand   nzl
1951 Morris Minor "Boris"
Yup, it's a '54 (http://www.auto-part.com/auto/shop/vin.asp). Btw, you can check the original paint colour, as there is a letter code on the engine bay chassis plate. Yours should be F (for Morris Minor) E (for Van) and then another letter (e.g. L = Light Blue). Check http://potteries.mmoc.org.uk/ID/Chassis.htm for the full list and you should be able to work out whether the paint is original or not. Another way is to take a panel off and see what's underneath (the dashboard plate is relatively painless)!! There should also be 2 numbers after the three letters - the first tells you whether it was built at Cowley and shipped here (No. 2 - unlikely!) or shipped here in bits (as a Completely Knocked Down kit) and built here (probably at Dominion Motors in Newmarket) - which would be the No. 5. The Second letter tells you the type of paint job it was given...

Got any pix?
Jonny

. You can hide this ad & support this site by upgrading to a Gold Membership ~ click here for more info.
tim cloake
rolleston, New Zealand   nzl
hey thanks JonnyW and David and that's really helpful ill defiantly check that all out tomorrow.
pictures are quite difficult to get at, at the moment as its cramped in between my granddads multiple stationary engines and a few other Morris's one behind and next to it but ill defiantly put some photos up tomorrow the best i can
cheers
timcloake
tim cloake
rolleston, New Zealand   nzl
hello everyone
so today granddad and i went down to the Morris and checked all the numbers on the engine bay plates the number given earlier is the correct one and then another below show : BSAU48-1965, we think that this is the seat belt anchorage creditation .
Granddad believes that the Morris is late 1960's as it has the factory fitted 1100 engine.
Do the vans have their own consecutive chassis numbers?
the colour is light blue and is original.
we have taken a couple of photos and will add them later on.

cheers
timcloake

. You can hide this ad & support this site by upgrading to a Gold Membership ~ click here for more info.
tim cloake
rolleston, New Zealand   nzl
These are the pictures of the Morris van
enjoy
cheers
timcloake
Attachments:
Morris van 002.jpg (29.4 KB) –
Morris van 002.jpg
Morris van 001.jpg (22.8 KB) –
Please Sign In or Register to view additional attachments.
David53 Avatar
David Hines
Sydney, Australia   aus
OK, well that's a 1000, so it can't be 1954 which would be a Series II Split Screen. Are you sure you have read the number correctly?

tim cloake
rolleston, New Zealand   nzl
hey the number is in the photo above.
the very last of the vans were fitted with 1100 motors, we understand the vans continued after the 1000's were discontinued.
we know the whole history of the Morris but not when it was made, my granddad was the second owner,the previous owner used it as a dry cleaning delivery van. All records are lost

cheers
timcloake



Edited 1 time(s). Last edit at 01/09/2012 07:39PM by timcloake.
tim cloake
rolleston, New Zealand   nzl
ian knight
levin, New Zealand   nzl
great choice for a first car tim. russ harvey over in the uk is a minor nut, who has two vans and also looks after the LCV ( light commercial vehicle ) register with vans from around the world on the list. he is also the editor of Minor Monthly magazine wich is currently out of print until they find another publisher ( a bloody good read ). email: editor @ minormonthly.co.uk. he should be able to tell you what you want to know.
tim cloake
rolleston, New Zealand   nzl
hey thanks ian
i will defiantly get in contact with him, he sounds like a helpful man to know
cheers
timcloake

tappetTwo Avatar
Tim Buck
timbuck2, Australia   aus
hi there Tim
that's one amazing shed, full of interesting stuff.
Mine is the same, but not so many morries.
Get stuck into the restoration and enjoy yourself.
It will cost you double what you think so be prepared to get a part time job, preferably where they PRINT money....
post up more pics the better, you are one lucky young man to say the least, good luck

Cheers
Peter



You may be right, but I'm seldom wrong....
pixelsmithusa Avatar
In reply to # 479 by timcloake Hello everyone
I have just recently had the all go on a restoration project with my granddad on a Morris Minor van.---

the serial number is : 247542

cheers
timcloake

Hello Tim,

What a fine first project for you. It will be something memorable for you in days to come. Don't be surprised if things turn more complicated as you get deeper into it though. I've had a Morris pickup for 12 years and getting near the end of a frame off restoration I started about 4-5 years ago.

The error other made in telling you is a '54 is that they were referencing the car serial numbers. LCV's have their own number sequencing and 247542 would be a mid 1968 model.

Cheers, and keep posting with your progress.



Gerard

http://gerardsgarage.com/



Edited 2 time(s). Last edit at 01/12/2012 12:46PM by pixelsmithusa.

Attachments:
DSCF7122sml.jpg (28.5 KB) –
Please Sign In or Register to view additional attachments.
tim cloake
rolleston, New Zealand   nzl
hi everyone

hopefully it shouldn't be too pricey, I have a part-time job at countdown in rolleston so that should keep the money issues sorted haha.
yeah my granddad has a tonne of engines in all sizes and from all time frames. He also has a late 60s or early 70s rover that he plans to restore in the winter aswell as helping me....hes gonna be a busy man.
now about pictures, the Morris is located in timaru and I live in rolleston so ill put as much pictures and posts about my progress when im down there. but for the meantime im working hard and earning lots of money for the restoration.
hey Gerard your Morris looking great, shouldn't be long now smiling smiley

cheers
timcloake
tappetTwo Avatar
Tim Buck
timbuck2, Australia   aus
hi great looking Ute project.
what are you going to do with the back tray?
use an original tray or build a nice custom hardwood one?eye rolling smiley

pixelsmithusa Avatar
In reply to # 537 by tappetTwo hi great looking Ute project.
what are you going to do with the back tray?
use an original tray or build a nice custom hardwood one?eye rolling smiley

I have the original bed. It's currently stripped to bare metal and I'm working on getting it prepped for paint. Here's a before shot of it





Gerard

http://gerardsgarage.com/
tim cloake
rolleston, New Zealand   nzl
Hey everyone
so today we made huge progress and managed to pull the morris out of the shed and parked it under a sheltered are just next to it. We found a bit more rust than we thought there was around the guttering,doors, and a little round the front panels. Maybe with a bit of luck tommorow we might have a look at the wheels and see if theres been any oil leak in the drums.
the pictures show my grandad backing the morris into the shed smiling smiley
Cheers

Attachments:
2012-03-03 16.30.08.jpg (32 KB) –
Please Sign In or Register to view additional attachments.
2012-03-03 16.30.39.jpg (31 KB) –
Please Sign In or Register to view additional attachments.
tim cloake
rolleston, New Zealand   nzl
hey everyone
does anyone know how much its gonna cost to re register this car back in NZ dollars?
as its been sitting in the shed for a good 20 years
cheers smiling smiley
hammynz Avatar
Rob Hammington
Hamilton, New Zealand   nzl
1959 Morris Minor 1000 "GORG1S"
Tim, if the rego has not been 'on hold' for the car, you need to go through a 're vin' process when you are ready to get the car on the road. I understand this involves a very extensive check of the car and is a bit expensive. Various figures are often thrown around but my understanding is that it could be in excess of $NZ500 (have no idea if this is correct!!), plus of course the actual registration fee which luckily is only about $111 per annum. I suggest you phone somebody at NZTA in your area so that you will have the official info on this. You have an interesting project there so good luck with it!!



Rob Hammington
Tamahere
Hamilton RD3
New Zealand

tim cloake
rolleston, New Zealand   nzl
Hey Rob

Thanks that was really helpful, ouch shes a bit expensive just to re-register a car, ohwell
cheers
bill fitzgerald
perth .wa, Australia   aus
Hi,tim.
I hav a van in perth Australia it has a 1000 motor just replaced the head which was cracked also the valves had rusted due to the crack.Cost $1000 to repair so it can be costly we did the labuor uorselves.Good luck with your project.

ray willis
prince albert, Saskatchewan, Canada   can
Tim,
There are numerous web-sites that have info on serial numbers etc and one I find helpful is minormania.com There is an attachement on the left side you can go to and it should head you in the correct direction. Seems to cover all the models from early side-valves to the various stages of introducing other models like LCV's. Good luck, and enjoy the world of M/M with your grandad.
Ray Willis
tappetTwo Avatar
Tim Buck
timbuck2, Australia   aus
so tim , what is happening withyour restoration?
your post are getting fewer,
does that mean that its geting harder?



You may be right, but I'm seldom wrong....

Add your reply here, or post your own questions!

Members Sign In if you've already registered, or
Register a New Account
Registration is free and takes less than a minute

Having trouble posting or changing forum settings?
Check the Forum Help File (FAQ) or contact the webmaster.
View the archived version of this thread.
Built using Phorum Open Source Software


Join Our Club

Sign In to post questions or share your photos!

MMForum Menu

Welcome

Forums ->

Morris Minor Chat

Buy, Sell & Trade

Modified Minors

Morris Major

Morris Isis

Member Meetup

Vendor & Group Buy

List Archives

Forum Search

Latest Posts

Journals

Calendar

Membership

Tech Library

Car Registry

Cars For Sale

Model Info

Directory

Member Map

MMForum Store

Search

Advertising Info

Smartphone quick link
mmforum.mobi

Adjust Text Size

Larger Smaller
Reset Save