vent glass

I am on a steep learning curve on this Morris..I have yet to get a parts catalog for the car..so for the mean time I have a possible vent glass source..so question...are the 2 and 4 door sedan front vent glass the same? I know on some models they are..just don't have a 4 door handy to do a look-see

Thanks

got lucky..found a site with a parts breakdown..appears the vents are the same L&R/2&4

I do have a vent glass and a side glass. I also have a tranny. E mail for price. Thanks Rod

Rod, got the post and the e-mail...being a parts deal I have sent the answer by PM..thanks a lot...

Hi.

I am looking for the small part that attaches the vent glass to the window frame.

Might you have one ?

Thanks

Mark Barrows
Athens GA
Morris Minor Pick Up 1960

Mark sorry but I do not have the part you need. I am looking for a parts car if you here of one then I would have a spare. Thanks for the inquiry. Thanks Rod

Hi Mark,

If you cannot find the top hinge closer, then I'd have one for a nominal $7 plus postage/mail (via PayPal).

Need to know L or R, and also the spacing of the holes into the door frame and into the window-glass frame.

To my knowledge there are two spacings, say narrow and wider!

Phi, Melbourne, Australia

Hi. I'm interested in Morris Minor Parts. Especially the Vent Glass Hinge.

Please call me


Thanks

Mark

706/ 367-1110 or 800 / 967-2410

Hi.

I need the top hinge for the left side Vent Glass. The hole spacing is 1 1/8".
I understand that there may have been two sizes.

How much do you want for the hinge and screws ?

I also need the metal plate that goes over the master cylender on the floor and wheels.

Thanks

Mark

706 367 1110 Athens GA

mbarrows@galileosys.com

Hi Tim

Do you mind sharing the site you found for the parrs list? Thanks

Phil,

I am still interested in the vent hinge.



Please email me at mbarrows@galileosys.com

Thanks


Mark

Hello folks. I just ran across your thread and thought you might appreciate my outstanding parts source: Jim Pocan at britautoparts.com. If he does not have your part new, he will likely have it used " out back.". His site has a .pdf catalogue with most parts clearly drawn. If that is not enough, he will walk you through every and any fixit from memory. He is in Oregon. Prices are good and delivery is very fast. Good luck.

I have two parts car for sale with the parts you need on them. If interested just e-mail me at dvclark3@hotmail.com. They have doors,fenders,hoods,etc.I live in East Tennessee. These cars do not have titles so they are for parts only. I believe they are 1959 or 1960 Morris Minor 1000s both are two door cars. If interested just contact me and I can give you morre information on the condidtions. Thanks Dicky Clark